RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift
SOLD OUT
RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift
The ultra popular 1/10 BendPak XPR-9S Two-Post Auto Lift now comes in grey to more closely reflect its current 1:1 counterpart
This is the new Licensed 1/10 BendPak XPR-9S Two-Post Auto Lift. These have been Officially Licensed by the BendPak company and are only available from RC4WD and our Dealers. Complete with battery and fully functional allowing for that ultimate scale garage look.
Specifications:
- Billet Aluminum Lift Towers, Lift Arms and Lift Base
- Steel Lift Screws
- Lifting Capacity: 22lbs/10kg
- The Overall Height: 16.50in / 420mm
- The Overall Width: 16.90in / 430mm
- Column Width: 1.57in / 40mm
- Arms Width: 0.63in / 16mm
- Lift Height Max: 9.45in / 240mm
- Time To Full Rise: 50 sec
- JST-PH 2.0 Battery Plug Connector
Shown with RC4WD Trail Finder 2 RTR w/Chevrolet Blazer Body Set (Limited Edition) (Z-RTR0035) for example (Not Included)
What's Included:
- 1x RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift
- 1x Battery Pack
- 1x BendPak Decal Sheet
- 1x Warning Decal Sheet
- 1x Instruction Manual
Required Parts:
- Charger needed with an appropriate plug to charge the included NIMH battery pack
Replacement Hardware:
- Steel Flat Head Cap Screw M2 X 4mm (Z-S1516)
- Steel Flat Head Socket Cap Screw M3 x 8mm (Z-S0649)
- Steel Button Head Cap Screws M3 x 4mm (Z-S0745)
- Steel Button Head Cap Screws M3 x 8mm (Z-S0652)
- Steel Socket Head Cap Screws M2 x 10mm (Z-S0849)
- Steel Socket Head Cap Screws M2 X 6mm (Z-S0611)
- Steel Flat Head Cap Screws M3 x 10mm (Z-S0860)
- Steel Socket Head Cap Screws M2.5 x 10mm (Z-S1290)
- Steel Socket Head Cap Screws M2.5 x 6mm (Z-S0855)
- M3 X 3mm Set screw (Z-S0124)
Notes:
- Adjustable Arms to fit many different vehicles
BendPak is a registered trademark of the BendPak XPR-9S company. The BendPak logo is property of BendPak XPR-9S and used under license by RC4WD.
