RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set
RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set
This is the all-new RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set. It is Officially Licensed by Warn Industries and features an On/Off switch with LED indicator, lanyard strap, and a 1:1 detailed remote design with rubber buttons for improved operation. It is exclusively available on RC4WD.com and our partnered dealers.
Specifications:
Remote
- Over 50ft Range
- Batteries Included
- Total Length: 2.10in / 53.5mm
- Total Width: 1.06in / 27mm
- Height: 0.59in / 15mm
- Weight: 0.49oz / 13.9g
- On/Off Switch
Receiver
- Small Compact Size
- Operating Voltage 6V to 11.1V
- Easy Plug and Play
- Instruction Included
- Length: 1.6in / 40.4mm
- Width: 1.2in / 30.2mm
- Height: 0.37in / 9.4mm
- Weight: 0.5oz / 14g
Wires
- Length: 6.0in / 150mm
- Wires Weight: 0.14oz / 4g
Lanyard
- Total Length: 7.24in / 184mm
- Weight: 0.14oz / 1.8g
Product
- 30 Day Warranty
- Designed and Manufactured by RC4WD
Shown installed with RC4WD 6-Cell 3000mAh NIMH Battery Pack (Z-E0092) and RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119) for example (Not Included)
What's Included:
- 1x WARN 1/10 Wireless Remote
- 1x Wireless Receiver Unit
- 1x 6" Battery/Receiver Power Wire
- 1x 6" Receiver/Winch Control Wire
- 1x Lanyard
- 1x Warn Decal Sheet
Optional Parts:
- RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119)
- RC4WD 1/8 Warn Zeon 10 Winch (Z-E0069)
- RC4WD 1/10 Mini Warn 9.5cti Winch (Z-S1571)
- RC4WD 1/10 Warn 8274 Winch (Z-E0075)
- Wire Accessory Pack For 1/10 Winch and Controllers (9") (Z-S0999)
- RC4WD Carabiner with Web Strap & Keyring (Z-L0060)
- Y Harness with XT60 Leads (Z-E0142)
Instruction Manual:
Notes:
- For Warnings, Precautions, Safety and Damage Limits: Click Here
- This Receiver on this product is waterproof but the Controller is not. You may be able to waterproof on your own but this will void the manufactures warranty.
- Tampering with this product in any way would result in voiding the warranty.
- Binding process can take 3-5 seconds.
- Some LiPo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell LiPo.
- The remote comes with a 3V CR2025 button cell.
Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries and used under license to RC4WD.